Admissions
 

For Admission Enquiry Contact: 080-67178026 (Admission Section)

For Hostel Enquiry Contact: 080-67178056 (RVCE Boys Hostel) 9945004632 (RVCE Girls Hostel)

Inauguration of I Sem B.E / B.Arch courses will be held on Sunday 30th Aug 2009.

Classes for I Sem MCA will commence from 25-09-2009(tentative).

Orientation Classes for I Sem B.E / B.Arch students will be held on 31-8-2009. Attendance is compulsory.

Classes for 1st, 3rd, & 5th Semester B.E / B.Arch courses (Autonomous) will commence from 1-9-2009.

Department of Mechanical Engineering

Dr. M. Krishna, Professor And Director - R&D Dr. M. Krishna
Educational Qualification Ph.D.
Experience Teaching: 06 years
Industry : 06 years
R&D: 13 years
Area of Interest Polymer Composites & Materials
Email ID krishna_phd@yahoo.co.in  

List of Publications:
Papers Published in National and International Journals:
  1. Evolution of Sliding Wear Behavior of Feldspar Particles Reinforced Magnesium Alloys and Composites, S.C.Sharma, B. Anand, M. Krishna, Wear Journal, vol. 241 (2000) pp.33-40.
  2. Oxidation Behavior of Aluminium-Albite Composites at Higher Temperature, S.C.Sharma, K.H.W.Seah, M.Krishna, A.Ramesh, Alloys and Compounds, vol.306, (2000) pp.270-276.
  3. A Study of the Coefficients of thermal expansion and residual thermal stresses of 6061Al-Albite Composites, S.C.Sharma, K.H.W.Seah, M.Krishna, A.Ramesh, Proc Instn. Mech. Engrs., vol.215 Part L, (2001) pp.55-59.
  4. A study on damping behaviour of aluminite particulate reinforced ZA-27 alloy metal matrix composites, Shantha Shastry, M.Krishna, Jayagopal Uchil, Journal of Alloys and Compounds vol.314, (2001) pp.268-274.
  5. Effect of thermal stresses on the thermal expansion and damping behavior of ZA-27/aluminite MMCs, Shantha Shastry, M.Krishna, Jayagopal Uchil, Journal of Material Science Engineering and Performance, vol.10 (2), pp.220-224.
  6. Dry sliding wear of garnet reinforced zinc/aluminum metal matrix composites, Author G. Ranganath, S C Sharma, M Krishna, WEAR, 251 (2001) pp.1408-1413
  7. Effect of garnet particle on the mechanical and microstructural properties of ZA-27 alloy composites, G.Ranganath, S.C.Sharma, M.Krishna, Journal of the Mechanical Behavior of Materials, Vol.12, NO.4, 2001, pp.239-254.
  8. Effect of Heat Treatment on the Corrosion behaviour of the LM13 alloy/Garnet Metal Matrix Composites, Authors: K.H.W.Seah, M.Krishna, V.T.Vijayalakshmi, Jayagopal Uchil, Corrosion Science, vol. 44, (2002) pp.917-925.
  9. Effect of Temperature and reinforcement content on corrosion characteristics of LM13 albite composites, K.H.W.Seah, M.Krishna, V.T.Vijayalakshmi, Jayagopal Uchil, Corrosion Science, vol. 44, (2002) pp.761-772
  10. Predicting Galvanic Corrosion Rates for LM13/Garnet Metal matrix composites in NaCl, K.H.W.Seah, M.Krishna, V.T.Vijayalakshmi, Jayagopal Uchil, (in press) for publication in Corrosion Science Journal.
  11. Effect of ageing parameters on the microstructure and properties of za-27/aluminite metal matrix composites, S.C.Sharma, Santa Shastry, M.Krishna Journal of Alloys and Compound, vol.346, (2002), pp.292-301.
  12. Mechanical properties and Fractography of titanium-dioxide particle reinforced ZA-27 alloy composites materials, S C Sharma, A Ranganath, M Krishna, Journal of Material Science Engineering and Performance, vol.11(4), (2002), pp.408-413.
  13. Thermal effects on mild wear transition in dry sliding of aluminium-7075/short glass fibre composites, S C Sharma, M Krishna, Paul Vizian, A Shashishankar, Journal of Automobile Engineering, vol. 216 PartD, (2002) pp.975-982.
  14. Mechanical properties and fracture mechanism of ZA-27/TiO2 particulate MMCs, Seah kar Hang, S C Sharma, M Krishna, Jour of Materials, Design & Applications, vol. 217 Part L, pp.201-206
  15. Effect of Titanium oxide particle on the transition wear behaviour of ZA-27 composites, G. Ranganath, M. Krishna, Jayagopal Uchil, Mohammed Shahmiri, (in press), for publication in Journal of Tribology
  16. A study of dynamic mechanical behaviour ZA-27 metal matrix composites G.Ranganath, S.C. Sharma, M.Krishna, Journal of the mechanical behaviour of Materials, vol 144, pp. (4-5), 2003.
  17. Interfacial studies in the fatigue behaviour of Polyurethane based sandwich structures, S C Sharma, H N Narasimha Murthy, M Krishna, Journal of Reinforced Plastics and Composites, vol.23, 8, (2004) pp, 893-903.
  18. Effect of Foam Density and Skin Material on the Damping Behaviour of Polyurethane Sandwich structures, S C Sharma, H N Narasimha Murthy, M Krishna, Journal of Reinforced Plastics and Composites Vol.23, No. 12 (2004) pp-1259-126
  19. Damping behaviour of aluminium/short glass fiber composites, S C Sharma, M Krishna, A Shashishankar and S Paul Vizhian, International Journal of Material Science and Engineering A, Vol. 364 (2004) pp.109-116
  20. Effect of Garnet on the Properties of ZA-27 alloy composites, G.Ranganath, S.C. Sharma, M.Krishna, Material Science and Engineering A, Vol. 364 (2004) pp.109-116
  21. Low Velocity Impact Damage analysis in polyurethane foam composites Sandwich structures, S C Sharma, H N Narasimha Murthy, M Krishna, Journal of Reinforced Plastics and Composites, vol.23, (17) pp.1869-1882.
  22. Buckling Response of Stitched polyurethane foam composite sandwich structures, S C Sharma, H N Narasimha Murthy, M Krishna, Journal of Reinforced Plastics and Composites Vol.23, No. 12 (2004) pp-1267-1277
  23. Damping Behaviour of Aluminium/Albite Metal Matrix Composites, KHW Seah, S C Sharma, M Krishna, Submitted for publication in Journal of Society of Material Engineers
  24. Influence of Heat Treatment on The Properties of Al6061/Albite Composites, M Krishna, S C Sharma, H N Narasimha Murthy, Trans. Indian Institute of Metals, v.56(4) (2003) pp.309-408
  25. Transitions in the Sliding Wear Resistance of Titanium Oxide Particle reinforced ZA27 alloy, S C Sharma, M Krishna, H N Narasimha Murthy, Trans Indian Institute of Metals, v.56(4) (2003) pp.439-444
  26. Studies on effect of residual thermal stress on the thermal expansion and damping behaviour of Al/ albite MMCs, S C Sharma, M Krishna, H N Narasimha Murthy, submitted to Journal of Material Science Engineering and Performance.
  27. Tensile fracture studies of polypropylene/e-glass laminates, Sanjeeva Murthy, S C Sharma, M Krishna, H N Narasimha Murthy, Engineering Today, Journal of Technological world, Volume V, issue 11, November 2003
  28. Fatigue behavior of PU sandwich structures, S C Sharma, M Krishna, H N N Murthy, D Bhattacharyya, Sathyamoorthy, Journal of Materials and Performance (ASM International), vol. 13(5), 2004, pp.637-641.
  29. Studies on the Effect of Residual Thermal Stresses on Thermal Expansion and Damping Behaviour of Al6061/ALBITE MMCs, S C Sharma, M Krishna and H N Narasimha Murthy Advances in Vibration Engineering vol.3 No.4 2004, pp. 320-331.
  30. Rajashekhar Algood , S C Sharma, Sayed Akeel Ahmed and Prashanth T "Mechanical Property Evaluation of Polyurethane based Epoxy and polyester Alloys" The Journal of CPRI, vol.2 (2) (2005) pp.187
  31. S C Sharma, M Krishna, H N Narasimha Muthrty, Saneevamurthy "Studies on the Weathering Behavior of Glass Coir Polypropylene Composites" Journal of Reinforced Plastics and Composites, Vol.25, (9), (2006) pp.925-932
  32. S C Sharma, M Krishna & H N Narasimha Murthy Delamination during drilling in polyurethane foam composite sandwich structures Journal of Materials Engineering and Performance, vol.15(3) June 2006.
  33. S C Sharma, M Krishna & H N NarasimhaMurthy, R Tarachandra, M Satyamoorthy, D Bhattacharyya Study of corrosive-erosive wear behaviour of Al6061/albite composites Materials Science and Engineering, A, Vol 425 (2006) pp.305-311
  34. S. C Sharma, R.Algood, A A Syed, A V Rajulu & M Krishna Compression properties of E-glass / Polyurethane Composites Journal of Reinforced Plastics and Composites, vol.25 (14) pp. 1445-1447
  35. S C Sharma, M Krishna & D Bhattacharyya Dry Sliding Wear Behaviour of Flyash Reinforced ZA-27 alloy Based Metal Matrix Composites International Journal of Modern Physics B, vol.20 (25,26 & 27), 2006 pp-4703-4708.
  36. S C Sharma, Narayanappa, M Krishna, H N Murthy, Numerical Study of Functionally graded Materials" Advanced Materials Research, vol. 29-30, (2007) pp.311-314
  37. S C Sharma, M Krishna, H N Murthy, Corrosive-erosive Wear Studies of Al6061/Albite Composites, Materials Science Forum, vol.339-349(2007), pp.751-755.
  38. N Shanmukha, M Krishna Microstructure Analysis of cold worked holes Materials Science Forum, vol.339-349(2007), pp.2222-2227.
  39. Jeena Jose Karippal, H. N Narasimha Murthy, K.S Rai, M Krishna, Sreejith M, "Electrical and thermal properties of twin screw extruded MWNT / epoxy composites", Journal of Materials Engineering and Performance, DOI: 10.1007/s11665-010-9604-6,2010
  40. Jeena J.K, H.N Narasimha Murthy, K.S Rai, M. Krishna, Sreejith M, "Effect of Amine functionalization of CNF on Electrical, Thermal and Mechanical properties of epoxy/CNF composites, Accepted for Publication (in Press) in Polymer Bulletin, 2010
  41. Jeena Jose Karippal, H. N Narasimha Murthy, K.S Rai, M Krishna, Sreejith M, "Thermal and Mechanical Characterization of Amine Functionalized MWNT/Epoxy Composites Processed Using Twin Screw Extrusion", Accepted for publication (in press) in Journal of Applied Polymer Science,2010
  42. Jeena Jose Karippal, H. N Narasimha Murthy, K.S Rai, M Krishna, Sreejith M, "Processing and Characterization of MWCNT/Epoxy and CB/Epoxy Nanocomposites Using Twin Screw Extrusion", Accepted for publication (in press) Polymer- Plastics Technology and Engineering. 2010
  43. Sreejith M, H.N Narasimha Murthy, K.S Rai, M. Krishna, S.C Sharma, Jeena J.K, "Hygrothermic behavior of carbon/vinylester, glass/vinylester, carbon/epoxy and glass/epoxy composites", Iranian Polymer Journal, 19(2), 2010, 89-103
  44. Sham Aan M P, Krishna. M, H N Narasimha Murthy, S K Rai,"Effect of PTMEG on the mechanical and flame retardance behavior of novolac phenolic based CFRP",Journal of Fibres and Polymers,2010
  45. Salini K, Krishna M, H N Narasimha Murthy, K S Rai, Satheesh chandran M, "Effect of addition of acrylonitrile-butadiene styrene on mechanical properties of bismaleimide/ carbon composites", Polymer- Plastics Technology and Engineering,2010
  46. B.R. Ramji, H.N Narasimha Murthy, M. Krishna,"Analysis of Forces, Roughness, Wear and Temperature in Turning Cast Iron Using Cryotreated Carbide Inserts", International Journal of Engineering Science and Technology Vol. 2(7), 2010, 2521-2529.
  47. B.R. Ramji, H.N Narasimha Murthy, M. Krishna. " Performance Study Of Cryo Treated hss drills in drilling Cast iron", International Journal of Engineering Science and Technology Vol. 2(7), 2010, 2530-2536.
  48. B.R. Ramji, H.N Narasimha Murthy, M. Krishna, "Analysis of Roughness and Flank Wear inTurning Gray Cast Iron Using Cryogenically Treated Cutting Tools", Research Journal of Applied Sciences, Engineering and Technology 2(5): 414-417, 2010.
  49. B.R. Ramji, H.N Narasimha Murthy, M. Krishna, "Performance Study of Cryogenically Treated HSS Drills in Drilling Gray Cast Iron Using Orthogonal Array Technique", Research Journal of Applied Sciences, Engineering and Technology 2(5): 414-417, 2010.
  50. Sreejith M, H.N Narasimha Murthy, K.S Rai, M. Krishna, Jeena J.K, "Mechanical property degradation in CFRPs due to Salt Fog Exposure Polymer Bulletin, 2009
  51. H. N. Narasimha Murthy, M. Sreejith, M. Krishna, S. C. Sharma, T. S. Sheshadri "Seawater Durability of Epoxy/Vinyl Ester Reinforced with Glass/Carbon Composites", Journal of Reinforced Plastics and Composites, vol. 00, no. 00/2009
  52. Jeena Jose Karippal, H. N Narasimha Murthy, K.S Rai, M Krishna, Sreejith M, "Study Of Mechanical Properties of Epoxy/Glass/Nanoclay Hybrid Composites", Journal of Composite Materials, 2010
  53. S. C. Sharma, T.S. Sheshadri, M. Krishna, H. N. Narashima Murthy, Jeena Jose, "Influence of Solvents on the MWCNT/Adhesive Grade Epoxy Nanocomposite Preparation", Journal of Reinforced Plastics and Composites, doi:10.1177/0731684408093977, 2008
  54. Satheesh Chandran, M Krishna, Salini K, K S Rai and M S Krupasankar, "Effect of molar ratio on cure kinetics and activation energy of modified Bismaleimide resins", Journal of Engineering Research and studies, Vol. 1 (1) (2010) pp.165-177.
  55. S. Mahendra Kumar , Parag A. Deshpande , M. Krishna , M. S. Krupashankara Giridhar Madras, "Photocatalytic Activity of Microwave, Plasma-Synthesized TiO2 Nanopowder, "Plasma Chem Plasma Process DOI 10.1007/s11090-010-9235-6
  56. S C Sharma, T S Sheshadri, M Krishna, H N N Murthy Jeena Jose, Influence of solvents on the MWCNT / adhesive Grade epoxy nanocomposites preparation, (Submitted) Journal of Reinforced Plastics and Composites,2010
  57. S C Sharma, T S Sheshadri, M Krishna, H N N Murthy "Neural network based prediction of electric discharge Machining of al/garnet metal matrix composites" Journal of Materials Engineering and Performance
  58. S C Sharma, T S Sheshadri, M Krishna, H N N Murthy "Effect of magnesium addition on the corrosion properties of al/e-glass short Fiber composites" Corrosion Science
  59. S C Sharma, T S Sheshadri, M Krishna, H N N Murthy "Numerical technique for efficient penetration of the imapactor, SIAM Journal on Numerical Analysis
  60. L Kodandarama1, M Krishna, H N Narasimha Murthy, & S C Sharma, Development and Characterisation of Electrocodeposited Nickel based, composites coatings, accepted for publication, Journal of Materials Engineering and Performance
  61. K R Vishnu Mahesh, H N Narasimha Murthy, R Sridhar, B E Kumaraswamy, M Krishna , B S Sherigara, Influence of Addition of Montmorillonite to the Matrix of vinylester/glass composites on their Mechanical, Thermal and Fire Retardation properties submitted for publication for Journal of Materials Engineering and Performaance
  62. Effect of molar ratio on cure kinetics and activation energy of modified bismaleimide resins, Satheesh Chandran. M, Krishna. M, Salini.K. K.S.Rai2 and M.S.Krupashankara, Journal of Engineering Research and Studies E-ISSN 0976-7916
  63. Jeena Jose Karippal, H. N Narasimha Murthy, K.S Rai, M Krishna, Sreejith M, "Electrical and thermal properties of twin screw extruded MWNT / epoxy composites", Journal of Materials Engineering and Performance, Volume 19, Number 8 (2010), 1143-1149,
  64. Jeena J.K, H.N Narasimha Murthy, K.S Rai, M. Krishna, Sreejith M, "Effect of Amine functionalization of CNF on Electrical, Thermal and Mechanical properties of epoxy/CNF composites, Polymer Bulletin, 2010, Volume 65, Number 8, 849-861
  65. Jeena Jose Karippal, H. N Narasimha Murthy, K.S Rai, M Krishna, Sreejith M, "Thermal and Mechanical Characterization of Amine Functionalized MWNT/Epoxy Composites Processed Using Twin Screw Extrusion", Accepted for publication (in press) in Journal of Applied Polymer Science, 2010
  66. Jeena Jose Karippal, H.N. Narasimha Murthy, K.S. Rai, M. Krishna, and M. Sreejith, Electrical and Thermal Properties of Twin-Screw Extruded Multiwalled Carbon Nanotube/Epoxy Composites, Journal of Materials Engineering and Performance Vol. 19, No. 8 November 2010, 1143-1150
  67. Jeena Jose Karippal, H. N Narasimha Murthy, K.S Rai, M Krishna, Sreejith M, "Processing and Characterization of MWCNT/Epoxy and CB/Epoxy Nanocomposites Using Twin Screw Extrusion", Accepted for publication (in press) Polymer- Plastics Technology and Engineering. Volume 49 Issue 12 (2010), 1207 – 1213
  68. Jeena Jose Karippal, H. N Narasimha Murthy, K.S Rai, M Krishna, Sreejith M, "Study Of Mechanical Properties of Epoxy / Glass/ Nanoclay Hybrid Composites", Journal of Composite Materials, 2010
  69. Sreejith M, H.N Narasimha Murthy, K.S Rai, M. Krishna, S.C Sharma, Jeena J.K,"Hygrothermic behavior of carbon/vinylester, glass/vinylester, carbon/epoxy and glass/epoxy composites", Iranian Polymer Journal, 19(2), 2010, 89-103
  70. Sham Aan M P, Krishna. M, H N Narasimha Murthy, S K Rai,"Effect of PTMEG on the mechanical and flame retardance behavior of novolac phenolic based CFRP", Accepted for publication (in press), Journal of Fibres and Polymers,2010
  71. Salini K, Krishna M, H N Narasimha Murthy, K S Rai, Satheesh chandran M, "Effect of addition of acrylonitrile-butadiene styrene on mechanical properties of bismaleimide/ carbon composites", Accepted for publication (in press) in Polymer- Plastics Technology and Engineering, 2010
  72. B.R. Ramji, H.N Narasimha Murthy, M. Krishna,"Analysis of Forces, Roughness, Wear and Temperature in Turning Cast Iron Using Cryotreated Carbide Inserts", International Journal of Engineering Science and Technology Vol. 2(7), 2010, 2521-2529.
  73. B.R. Ramji, H.N Narasimha Murthy, M. Krishna. "Performance Study of cryotreated HSS drills in drilling Cast iron", International Journal of Engineering Science and Technology Vol. 2(7), 2010, 2530-2536.
  74. B.R. Ramji, H.N Narasimha Murthy, M. Krishna, "Analysis of Roughness and Flank Wear in Turning Gray Cast Iron Using Cryogenically Treated Cutting Tools", Research Journal of Applied Sciences, Engineering and Technology 2(5): 414-417, 2010.
  75. B.R. Ramji, H.N Narasimha Murthy, M. Krishna, "Performance Study of Cryogenically Treated HSS Drills in Drilling Gray Cast Iron Using Orthogonal Array Technique", Research Journal of Applied Sciences, Engineering and Technology 2(5): 414-417, 2010.
  76. H. N. Narasimha Murthy, M. Sreejith, M. Krishna, S. C. Sharma, T. S. Sheshadri "Seawater Durability of Epoxy/Vinyl Ester Reinforced with Glass/Carbon Composites", Journal of Reinforced Plastics and Composites, vol. 00, no. 00/2009
  77. Jeena Jose Karippal, H. N Narasimha Murthy, K.S Rai, M Krishna, Sreejith M, "Study Of Mechanical Properties of Epoxy/Glass/Nanoclay Hybrid Composites", Accepted for publication (in press) in Journal of Composite Materials
  78. Satheesh Chandran, M Krishna, Salini K, K S Rai and M S Krupasankar, "Effect of molar ratio on cure kinetics and activation energy of modified Bismaleimide resins", Journal of Engineering Research and studies, Vol. 1 (1) (2010) pp.165-177.
  79. S. Mahendra Kumar , Parag A. Deshpande , M. Krishna , M. S. Krupashankara • Giridhar Madras, "Photocatalytic Activity of Microwave, Plasma-Synthesized TiO2 Nanopowder, "Plasma Chem Plasma Process DOI 10.1007/s11090-010-9235-6
  80. Vishnu Mahesh K R, H N Narasimha Murthy*, B E Kumara Swamy, Sridhar R, M Krishna and B S Sherigara, "Influence of Addition of Montmorillonite to the Matrix of vinylester/glass composites on their Mechanical, Thermal and Fire Retardation properties" Journal of Materials Engineering and Performance (Accepted).
  81. Vishnu Mahesh K R, H N Narasimha Murthy*, B E Kumara Swamy, Sridhar R and M Krishna and B S Sherigara, "Influence of Twin-Screw Extrusion on the Dispersion of Montmorillonite in Vinylester Matrix" Polymer Bulletin (Submitted).
  82. L Kodandarama1, M Krishna, H N Narasimha Murthy, & S C Sharma, Development and Characterisation of Electrocodeposited Nickel based, composites coatings, accepted for publication, Journal of Materials Engineering and Performance
  83. Satheesh Chandran. M, Krishna. M, Salini.K. K.S.Rai2 and M.S.Krupashankara Effect of molar ratio on cure kinetics and activation energy of modified bismaleimide resins, , Journal of Engineering Research and Studies E-ISSN 0976-7916
  84. Gopalakrishna, H.D., Narasimha Murthy, H.N., Krishna, M., Vinod, M.S., Suresh, A.V. Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al 2024 T3 alloy – An experimental study, Engineering Failure Analysis, ISSN: 1350-6307, Vol: 12, Issue: 2, Date: 2010-01-01,
  85. Sham Aan, M. P., Krishna, M., Narasimha Murthy, H. N., Rai, S. K. "Effect of PTMEG on the mechanical and flame retardance behaviour of novolac phenolic based CFRP" Fibers and Polymers, Vol: 11, Issue: 7, (2010), pp.1083-88
  86. Gopalakrishna, H.D. | Narasimha Murthy, H.N. | Krishna, M. | Vinod, M.S. | Suresh, A.V. Cold expansion of holes and resulting fatigue life enhancement and residual stresses in Al 2024 T3 alloy – An experimental study Engineering Failure Analysis, Vol: 17, Issue: 2, Date: 2010-01-01, Start page: 361, # of pages: 8
  87. Narasimha Murthy, H.N., Sreejith, M., Krishna, M., Sharma, S.C., Sheshadri, T.S. Seawater Durability of Epoxy/Vinyl Ester Reinforced with Glass/Carbon Composites Journal of Reinforced Plastics and Composites, Vol: 29 (10), (2010), pp. 1491-1500
  88. Sridhar R, Narasimha Murthy H N, Niranjan Pattar, Vishnu Mahesh K R & Krishna M, " Parametric study of twin screw extrusion for dispersing MMT in Vinyl ester using Orthogonal array technique and grey relational analysis, Journal of Composites Part B (Submitted)
  89. V T Bhanu Kiran, M Krishna, Praveen M, Niranjan Pattar, "Numerical simulation of Multilayer Hardfacing on low carbon steel" Accepted for Publication
  90. C. Yuvaraja, K.V. Sharma and M. Krishna, Effect of Drilling Parameters on Drillability Behaviour of Al/Al2O3 MMCs International Journal of Applied Engineering Research ISSN 0973-4562 Volume 5 Number 7 (2010) pp. 1203–1213
  91. Dr.K.Prahalad Rao, Dr.D.P.Girish, S.M.Sanjay kumar, M.Krishna, Transitions in the Sliding Wear Resistance of SiC Particle Reinforced Al alloy, International Conference on Emerging Trends in Engineering
  92. Salini K, Krishna M, K S Rai and Satheesh chandran M, Abs modified bmi resins-effect of abs Content on the performance of the resin And composites, Journal of Engineering Research and Studies, E-ISSN 0976-7916 (2011)
International and National Conference:
  1. A quantitative analysis of coefficient of thermal expansion of albite reinforced Al6061 MMCs M.Krishna, S.C.Sharma, A.Ramesh, Presented at 6th Japan International SAMPE Symposium & Exhibition (JISSE-6), Tokyo, Japan. October 26-29, 1999,
  2. Oxidation behaviour of Aluminium-Albite Composites at higher temperature, S.C.Sharma, M.Krishna, A.Ramesh, Presented at International Scientific practical conference on "Modern Technology in Aerospace Complex" held at Zhitomir Institute of Engineering and Technology, Ukraine, during September 7-9, 1999.
  3. Predicting Galvanic Corrosion behavior of Hematite/Al6061 Metal Matrix Composites in HCl V.T.Vijayalakshmi, M.Krishna, Jayagopal Uchil, Presented at International Scientific practical conference on "Modern Technology in Aerospace Complex" held at Zhitomir Institute of Engineering and Technology, Ukraine, during September 7-9, 1999.
  4. A study of Stress Corrosion Behavior of LM13/Albite Composites in High Temperature and Pressure Acidic Medium Using Autoclave. V.T.Vijayalakshmi, M.Krishna, A.Ramesh, Jayagopal Uchil, In Recent Advances in Experimental Mechanics, held at Department of Aerospace Engineering, Indian Institute of Technology, Kanpur, India. During March 15-16, 2000.
  5. Flyash Precipitate Reinforced Al-7075 Alloy Composite Materials for Journal Bearing Applications. A.Shashishankara, S.C.Sharma, M.Krishna, C.S.C.Murthy, Presented at In Recent Advances in Experimental Mechanics, held at Department of Aerospace Engineering, Indian Institute of Technology, Kanpur, India. During March 15-16, 2000.
  6. Sliding Behaviour of Garnet Particle Reinforced ZA-27 Alloy Composite Materials. G. Ranganath, S.C.Sharma, M.Krishna, Presented at In Recent Advances in Experimental Mechanics, held at Department of Aerospace Engineering, Indian Institute of Technology, Kanpur, India. During March 15-16, 2000.
  7. Effect of Short Glass Fibers on the Mechanical Properties of Cast Al-7075 Alloy Composites. Paul Vizhian, M.Krishna, Presented at In Recent Advances in Experimental Mechanics, held at Department of Aerospace Engineering, Indian Institute of Technology, Kanpur, India. During March 15-16, 2000.
  8. Dry Sliding Wear Behaviour of Quartz Particle Reinforced ZA-27 Alloy Composite Material P.V.Krupakara, S.Manjunath, M.Krishna, Jayagopal Uchil, Presented at In Recent Advances in Experimental Mechanics, held at Department of Aerospace Engineering, Indian Institute of Technology, Kanpur, India. During March 15-16, 2000.
  9. The Sliding Wear Behavior of Al-6061-Garnet particulate Composite K.H.Thipperudrappa, S.C.Sharma, M.Krishna, Presented at In Recent Advances in Experimental Mechanics, held at Department of Aerospace Engineering, Indian Institute of Technology, Kanpur, India. During March 15-16, 2000.
  10. Evaluation of sliding wear behaviour of Flyash microsphere reinforced aluminum-7075 alloy composites, A.Shashishankara, S.C.Sharma, M.Krishna, C.S.C.Murthy, Presented at In National Seminar on Bulk Utilization of fly ash (BUFA 2000) at Department of Structural Engg. Annamalai University, Tamil Nadu, during March 18-19, 2000
  11. Flyash as reuse material in development of new wear-resistant composites, A.Shashishankar, S.C.Sharma, M.Krishna, Presented at In Proceedings of National symposium on environment, june-5-7, 2000, Focal Theme Pollution in urban environment, Bangalore. Board of Research in Nuclear Science department of Atomic Energy Govt. of India. Pp.292-295.
  12. A study on Stress Corrosion behavior of Al6061/albite composite at higher temperature in acidic medium using Autoclave, V.T.Vijayalakshmi, M.Krishna, A.Ramesh and Jayagopal Uchil, Presented in Advances in Composites, Proceeding of the Third International Conference, 24-26 August 2000, Bangalore, India, pp.501.
  13. A study on Damping Behaviour of Aluminite Particulate Reinforced ZA-27 Alloy Metal Matrix Composites, Shanta Sastry, M.Krishna and Jayagopal Uchil, Presented Advances in Composites, Proceeding of the Third International Conference, 24-26 August 2000, Bangalore, India, pp.510.
  14. Predicting Galvanic Corrosion Rates for ZA-27/Quartz Metal Matrix Composites in NaCl, P.V.Krupakara, S.Manjunath, M.Krishna, and Jayagopal Uchil, Presented Advances in Composites, Proceeding of the Third International Conference, 24-26 August 2000, Bangalore, India, pp.517.
  15. A stud on Sliding Wear Behaviour of Flyash Reinforced Aluminum 7075 Alloy Composites, Shashishankar, M.Krishna, and C.S C Murthy Presented Advances in Composites, Proceeding of the Third International Conference, 24-26 August 2000, Bangalore, India, pp.583
  16. Oxidation behavior of aluminium 6061-hematite particulate MMCs at elevated temperature, S.C.Sharma, M.Krishna, N.Shanmukha, Presented at Second International conference on Processing Materials for Properties, Held in San Francisco, California, November 5-8, 2000, pp-117.
  17. A study on the mechanical behavior of ZA-27 alloy/quartz particulate composites, P.V.Krupakara, S.Manjunath, M.Krishna, Jayagopal Uchil, Presented and published at Second International conference on Processing Materials for Properties, Held in San Francisco, California, November 5-8, 2000, pp-141.
  18. A Case study on corrosion properties of garnet particulate reinforced aluminum composites, V.T. Vijayalakashmi, M.Krishna, Jayagopal Uchil, Presented at Second International conference on Processing Materials for Properties, Held in San Francisco, California, November 5-8, 2000, pp-145.
  19. Elastic behavior of aluminite particulate reinforced ZA-27 alloy metal matrix composites, Shanta Sastry, Jayagopal Uchil, M.Krishna, B.M.Satish, Presented at Second International conference on Processing Materials for Properties, Held in San Francisco, California, November 5-8, 2000, pp-175.
  20. Damping behavior of aluminite particulate reinforced ZA-27 alloy Metal Matrix Composites, Shanta Sastry, M.Krishna, Jayagopal Uchil, Presented and published at Second International conference on Processing Materials for Properties, Held in San Francisco, California, November 5-8, 2000, pp-185.
  21. Study on the Mechanical Properties of Z A-27 Alloy Reinforced With Quartz Particles, P.V.Krupakara, S.C.Sharma, S.Manjunath, M.Krishna, Presented and published at ASM International Materials Solutions- 2000 (October 10-120, 2000) Held in St. Louis, Missouri USA.
  22. Thermal Mismatch Stresses in a Metal Matrix Composites-A Finite Element Analysis, S.C.Sharma, M.Krishna, Presented and published at ASM International Materials Solutions- 2000(October 10-120, 2000), Held in St. Louis, Missouri USA.
  23. A Case Study on Corrosion Properties Of Garnet Particles Reinforced Aluminium Composites, V.T. Vijayalakshmi, M.Krishna, Jayagopal Uchil, Presented and published at ASM International Materials Solutions- 2000(October 10-120, 2000), Held in St. Louis, Missouri USA.
  24. A Study on Damping Behavior of Garnet Particulate Reinforced ZA-27 alloy Metal Matrix Composites, G.Ranganath, S.C.Sharma, M.Krishna, and A. Ramesh, Presented and published at Future Trends in Mechanical Engineering, Proceedings of XVI national convention of mechanical engineers (September 29-30), at Rookee, pp. 08.
  25. Effect of Short Glass Fibers on the Coefficient of Thermal Expansion Behaviour of the Al7075 Alloy Composites, Paul Vizhian S., S.C.Sharma, M.Krishna, Presented and published at Future Trends in Mechanical Engineering, Proceedings of XVI national convention of mechanical engineers (September 29-30), at Rookee, pp. 14.
  26. Effect of Thermal Stresses on the thermal expansion and damping behaviour Al6061/albite MMCs, Heat Treat 2001, ASM International Heat Treating Society, Indiana Convention Center, Indianapolis, Indiana USA, November 5-8, 2001.
  27. Effect of ageing parameter on the microstructure and properties of al6061/albite composites, S.C.Sharma, M.Krishna, H.N.Narasimha murthy, Invited paper held between 1 & 7 July 2001, ICMAT 2001, University of Singapore.
  28. Effect of Thermal Stresses on the thermal expansion and damping behaviour Al6061/albite MMCs, AMPT 01, International Conference on Advances in Materials and Processing Technologies, September 18-21, 2001, Legnes, Madrid, Spain.
  29. Effect of Ageing Parameter on The Microstructure and Properties of Al6061/albite composites, S C Sharma, M Krishna, H N Narasimha Murthy, Proceedings 17th National Convention of Mechanical Engineers, Indore, 26-27 November 2001 pp. 121-131.
  30. Effect of Short Glass fiber on the Mechanical Properties and Fracture of the Polyurethane composites. S C Sharma, H N Narasimha Murthy, M Krishna, C S C Murthy, Proceedings 17th National Convention of Mechanical Engineers, Indore, 26-27 November 2001 pp. 139-145.
  31. An Internet-Enabled Technology to support Flexible Manufacturing systems, S C Sharma, H N Narasimha Murthy, M Krishna, Proceedings 17th National Convention of Mechanical Engineers, Indore, 26-27 November 2001 pp. 664-669.
  32. On-line Shop floor control for a High-tech Medical Equipment Company, Dr. S.C.Sharma, M.Krishna, H.N.Narasimha murthy, A National Conference on recent trends in Manufacturing technology and Management, Hosure 28-29 January 2002. pp.206-214
  33. Some studies on aging behaviour of al6061/albite composites, Dr. S.C.Sharma, M.Krishna, H.N.Narasimha murthy, A National Conference on recent trends in Manufacturing technology and Management at Hosure28-29 January 2002. pp.197-205
  34. Evaluation of mechanical properties of polyurethane-e glass fiber reinforced composites, Dr. S.C.Sharma, M.Krishna, H.N.Narasimha murthy, A National Conference on recent trends in Manufacturing technology and Management at Hosure, 28-29 January 2002. pp.184-196.
  35. Effect of Aging on Oxidation Behavior of magnesium/SiCp Composites at High Temperatures, H N Gayathri, M Krishna, H N Narasimha murthy, Dr C S C Murthy, A National Conference on recent trends in Manufacturing technology and Management at Hosure28-29 January 2002. pp.197-205..
  36. Evaluation of Machining Characteristics of Al7075/E-glass short Fiber composites, Paul Vizhian S, S C Sharma, M Krishna, A Proceedings of National Conference on Processing of Metals at PSG College of Technology, Coimbatore Jan31-Feb01, 2002, pp.421-429.
  37. Review of Polyurethane's in Composites, S C Sharma, H N Narasimha Murthy and M Krishna, National Seminar on Processing, Characterization and Applications of Light Structural Materials for Frontier Sectors, The Indian Institute of Metals Trivandrum Chapter 14-15 February 2002.
  38. Dry Sliding Wear Behaviour at Ambient and Elevated Temperatures of Al/Glass Composites, S C Sharma, A Shashishankar, Paul Vizhian, M Krishna and H N Narasimha murthy, National Seminar on Processing, Characterization and Applications of Light Structural Materials for Frontier Sectors, The Indian Institute of Metals Trivandrum Chapter 14-15 February 2002.
  39. Studies on Effect of Residual Thermal Stresses on the Thermal Expansion and Damping Behaviour of Al6061/Albite MMCs, S C Sharma, M Krishna and H N Narasimha Murthy, National Seminar on Processing, Characterization and Applications of Light Structural Materials for Frontier Sectors, The Indian Institute of Metals Trivandrum Chapter 14-15 February 2002.
  40. Corrosion Behaviour on Magnesium/SiC Particulate Metal Matrix Composites, H N Gayathri, Jayagopal Uchil, M Krishna and H N Narasimha Murthy, National Seminar on Processing, Characterization and Applications of Light Structural Materials for Frontier Sectors, The Indian Institute of Metals Trivandrum Chapter 14-15 February 2002.
  41. An Internet-Enabled Technology to support Flexible Manufacturing Systems, S C Sharma, M Krishna, Proceedings of National Conference recent trends in CAD/CAM, Jawaharlar Neharu Technological University, Kakinada 30 March 2002 pp.92-94.
  42. Finite element modeling of 3-D Braided e-glass polyurethane elastomer tubes, S C Sharma, H N Narasimha Murthy, M Krishna, C S C Murthy, Proceedings of National Conference recent trends in CAD/CAM, Jawaharlal Nehru Technological University, Kakinada 30 March 2002 pp.95-97.
  43. Thermal mismatch stresses in a metal matrix composites-A Finite Element Analysis S C Sharma, A Shashishankar M Krishna, H N Narasimha Murthy, Proceedings of National Conference recent trends in CAD/CAM, Jawaharlal Nehru Technological University, Kakinada 30 March 2002 pp.5-7.
  44. A study of the Fatigue behaviour of polyurethane sandwich structures, H N Narasimha Murthy, S C Sharma, M Krishna, Fourth National Symposium of Research Scholars on Metals (NSRS-4, 2002), The Indian Institute of Metals, Chennai Chapter, IIT Madras, Chennai 27-28 September 2002.
  45. Comparative study of curing methods for PU/e-glass elastomers H N Narasimha Murthy, S C Sharma, M Krishna, Fourth National Symposium of Research Scholars on Metals (NSRS-4, 2002), The Indian Institute of Metals, Chennai Chapter, IIT Madras, Chennai 27-28 September 2002.
  46. Influence of Heat treatment on the properties of Al6061/albite composites, M Krishna, S C Sharma, H N Narasimha Murthy Fourth National Symposium of Research Scholars on Metals (NSRS-4, 2002), The Indian Institute of Metals, Chennai Chapter, IIT Madras, Chennai 27-28 September 2002. (ARCI BEST PAPER AWARD)
  47. A study on damping behaviour of aluminium/short glass composites, S Paul Vizhian, M Krishna, A Shashishankar, Fourth National Symposium of Research Scholars on Metals (NSRS-4, 2002), The Indian Institute of Metals, Chennai Chapter, IIT Madras, Chennai 27-28 September 2002. (BEST PRESENTATION AWARD)
  48. Corrosion Characteristics of Magnesium/SiCp Composites in Chloride Environments, H.N.Gayathri, Jayagopal Uchil, M.Krishna, H.N.Narasimha murthy, Fourth National Symposium of Research Scholars on Metals (NSRS-4, 2002), The Indian Institute of Metals, Chennai Chapter, IIT Madras, Chennai 27-28 September 2002.
  49. Transitions In The Sliding Wear Resistance Of Titanium Oxide Particle Reinforced ZA27 Alloy G.Ranganath, Dr. S C Sharma, M Krishna, H N N Murthy, Fourth National Symposium of Research Scholars on Metals (NSRS-4, 2002), The Indian Institute of Metals, Chennai Chapter, IIT Madras, Chennai 27-28 September 2002.
  50. Influence of heat treatment on corrosion properties of an Al/E-glass short fiber composites, Paul Vizhian S, S C Sharma, A Shashishankar, M Krishna, Proceedings - National Conference on Advances in Manufacturing Technology, Indian Institute of Engineers, Palgot.
  51. Tensile fracture studies of polypropylene/e-glass laminates, Sanjeeva Murthy, S C Sharma, M Krishna, H N Narasimha Murthy, First National Conference on Emerging Trends In Engineering, Technology & Management, September 8-9, 2003, Adhiamman Engineering College, Hosur, Tamil Nadu.
  52. The effect of fiber content on impact strength of glass fiber/ polypropylene composites, Sanjeeva Murthy, S C Sharma, M Krishna, H N Narasimha Murthy, National Conference on Advances In Materials And Their Processing December, 22,23, 2003, BEC, BAGALKOT.
  53. Tensile stress analysis of polypropylene –e glass laminates at different strain rates, Sanjeeva Murthy, S C Sharma, M Krishna, H N Narasimha Murthy, National seminar on Recent Advances In Mechanical Engineering, January 16-17, 2004, K.K.Wagh College of Engineering, Nasik, Maharastra.
  54. Analysis of flexural strength of polypropylene e glass laminates at different rate of loading, Sanjeeva Murthy, S C Sharma, M Krishna, H N Narasimha Murthy, National Conference on Advances In Mechanical Engineering, February 12-14, 2004, JNNCE, SHIMOGA
  55. Study of Corrosive-Erosive Wear Behaviour Al6061/Albite Composites "Proceedings of International conference on Processing & Manufacturing of Advanced Materials, THERMAC' 2006, Vancouver, Canada
  56. "Microstructure analysis of cold worked holes" in THERMEC'2006, International Conference on "processing & manufacturing of advanced materials" held at Vancouver, Canada 04-08 July 2006.
  57. "Finite element analysis of pre-stressed fastener holes for enhanced fatigue performance for automotive applications" accepted for presentation in the International Conference ICAMP-4, Advanced materials & processing conference, Department of materials and process Engineering, university of Waikato, Hamilton, New-Zealand to be held December 10-13, 2006.
  58. "Seawater Durability of Vinylester/Glass and Epoxy/Glass Composites for Marine Applications", Sreejith M, H.N NarasimhaMurthy, M. Krishna, S.C Sharma, Jeena J.K, Proceedings of National Conference: Advances and Contemporaries in Mechanical Engineering- ACME-2008 February 07-08, 2008, Mechanical Engineering Department of Erode Sengunthar Engineering College, Thudupathy, Erode, TamilNadu
  59. "Seawater Durability of Epoxy/Vinylester Reinforced with Glass/Carbon Composites", Sreejith M, H.N Narasimha Murthy, M. Krishna, S.C Sharma, Jeena J.K, Communicated to International Journal of Reinforced Plastic
  60. "Hygrothermic Behavior of Carbon/Glass Reinforced Epoxy/Vinylester Composites", Sreejith M, H.N Narasimha Murthy, K.S Rai, M. Krishna, S.C Sharma, Jeena J.K, International Conference-ISRS-2008, IIT Chennai
  61. "Effect of Hygrothermal aging on the Mechanical Properties of Carbon/Glass fiber Reinforced Epoxy/Vinylester Composites", Sreejith M, H.N Narasimha Murthy, K.S Rai, M. Krishna, S.C Sharma, Jeena J.K, Communicated to International Journal of Reinforced Plastic.
  62. "Influence of Solvents on the MWCNT/Adhesive Grade Epoxy Nanocomposite Preparation", H.N Narasimha Murthy, M. Krishna, S.C Sharma, Jeena J.K, Accepted for Publication (in Press) in Journal of Reinforced Plastics and Composites.
  63. "Effective dispersion of MWCNT into Epoxy Encapsulant and the Resulting Electrical and Thermal Conductivities", Jeena J.K, H.N Narasimha Murthy, M. Krishna, S.C Sharma, Sreejith M, Proceedings of National Conference: Advances and Contemporaries in Mechanical Engineering- ACME-2008 February 07-08, 2008, Mechanical Engineering Department of Erode Sengunthar Engineering College, Thudupathy, Erode, TamilNadu.
  64. "MWCNT/CNP Dispersed Epoxy Nanocomposite for Enhanced Electrical Conductivity and Thermal Conductivity", Jeena J.K, H.N Narasimha Murthy, M. Krishna, S.C Sharma, Sreejith M, International Conference od Aerospace Scince and Technology (NAL 50- INCAST) June 26-28, 2008, NAL Bangalore
  65. "MWCNT/Carbon black dispersed into Structural Adhesive (Epoxy) Using Twin Screw Extruder for improved Electrical conductivity", Jeena J.K, H.N Narasimha Murthy, K.S Rai, M. Krishna, S.C Sharma, Sreejith M, International Conference-ISRS-2008, IIT Chennai
  66. Vishnu Mahesh K R, H N Narasimha Murthy*, Sridhar R, M Krishna, B E Kumara Swamy and B S Sherigara. "Impact and Fire Retardation Studies of vinyl ester/nanoclay/glass nanocomposites for Marine Applications", [Invited Paper] for The Second International Conference on Polymer processing & Characterization (ICPPC – 2010), Kottayam, Kerala, India, January 15-17, 2010.
  67. Vishnu Mahesh K R, Sridhar R, H N Narasimha Murthy*, M Krishna, B E Kumara Swamy and B S Sherigara. "Effect of Dispersing Nanoclay in to Epoxy Resin For Superior Mechanical Properties and Fire Retardency", [Invited Paper] for the "International conference on Recent Trends in Materials and Characterization", (RETMAC-2010), NITK, Surathkal, Karnataka, India. February 14-15, 2010.
  68. Vishnu Mahesh K R, H N Narasimha Murthy*, Sridhar R, M Krishna, B E Kumara Swamy and B S Sherigara. "Experimental Study on Dispersion of Nanoclay into Vinylester Using Ultrasonication and Twin Screw Extrusion", [Oral Presentation] for the International Conference On "Convergence Of Science & Engineering In Education And Research, A Global Perspective In The New Millennium"(ICSE-2010), Dayanand College of Engineering, Bangalore, Karnataka, India. April 21-23, 2010.
  69. Vishnu Mahesh K R, H N Narasimha Murthy*, Sridhar R, M Krishna, B E Kumara Swamy and B S Sherigara."Comparative Studies on Different grades of Nano Clay for their Fire Retardancy in vinyl ester/glass composites for Naval Applications", [Oral Presentation] for the National Conference On "Advances in Forming Technologies" (AIFT-2010), R.V.College of Engineering, Bangalore. April 15-16, 2010.
  70. Vishnu Mahesh K R, H N Narasimha Murthy*, Sridhar R, M Krishna, B E Kumara Swamy and B S Sherigara. "Experimental Study on Glass transition Temperature of Different percentages of Nanoclays/Vinylester Composites from Differential Scanning Calorimeter", [Poster Presentation] National Symposium on "Frontier Areas in Chemical Science and Nanotechnology (NSFACNT-2010)" Organized by Dept. of Industrial Chemistry, Kuvempu University. May 1-2, 2010.
  71. Vishnu Mahesh K R, H N Narasimha Murthy*, Sridhar R, M Krishna, B E Kumara Swamy and B S Sherigara Effect Of Nanoclay Dispersion On The Mechanical And Fire Retardation Properties Of Vinylester/Carbon Nanocomposites Using Twin Screw Extrusion. (Oral Presentation), November 18-19 2010, SIT,Tumkur.
  72. Vishnu Mahesh K R, H N Narasimha Murthy*, Sridhar R, M Krishna, B E Kumara Swamy and B S Sherigara "Moisture Diffusion through Nanoclay/vinylester/glass Nanocomposites due to alkaline solution ageing and property degradations" (Accepted for Oral Presentation). International Conference on Composites for 21st Century: Current & Future Trends. January, 4-7, 2011, Indian Institute of Science, Bangalore.
  73. Vishnu Mahesh K R, H N Narasimha Murthy*, Sridhar R, M Krishna, B E Kumara Swamy and B S Sherigara "Effect of Salt Fog Environment on MMT/vinylester/glass Nanocomposites" (Invited Paper) International Conference on Composites and Nanocomposites (ICCNC-2011)" January, 7-8, 2011 at Mathma Gandhi University, Kottayam, Kerala.
  74. Vishnu Mahesh K R, H N Narasimha Murthy*, Sridhar R, M Krishna, B E Kumara Swamy and B S Sherigara "Sea Water Durability of MMT/vinylester/glass Nanocomposites due to alkaline solution ageing and property degradations" (Accepted for Oral Presentation). "International Conference on Materials for future (ICMF - 2011)" on 22-23, February, 2011 at Government Engineering College, Trisoor, Kerala
  75. Sridhar R, H N Narasimha Murthy*, M Krishna and Vishnu Mahesh K R "Effect of Nanoclay Dispersion on the Mechanical Properties of Vinylester/Glass/Nanoclay Composites", [Invited Paper] for The Second International Conference on Polymer processing & Characterization (ICPPC – 2010), Kottayam, Kerala, India, January 15-17, 2010.
  76. Sridhar R1, H N Narasimha Murthy*, M Krishna1, Niranjan Pattar, Manjunath Bhagavathi and Vishnu Mahesh K R , "Comparative Study of Naval Grade Nanoclay Dispersed Vinylester/glass Composites for Mechanical Properties" [Oral Presentation] for the National Conference On "Advances in Forming Technologies" (AIFT-2010), R.V.College of Engineering, Bangalore. April 15-16, 2010.
  77. Niranjan Pattar, H N Narasimha Murthy*, Sridhar R, Manjunath B , Vishnu Mahesh K R. "Influence of twin-screw extrusion parameters on the dispersion of Montmorillonite nanoclay in Vinylester matrix", [Oral Presentation] for the National Conference On "Advances in Forming Technologies" (AIFT-2010), R.V.College of Engineering, Bangalore. April 15-16, 2010.
  78. A paper titled "Study of mechanical properties of nickel based composite coatings", a state level student technical paper presentation competition. Read Me - 2010 Recent Advances in Mechanical Engineering, organized by FLAMES association of mechanical engineering students, SAHYADRI College of Engineering & Management, Mangalore, held at 6th March 2010.
  79. A paper titled "STUDY OF TENSILE AND SURFACE PROPERTIES OF ELECTRODEPOSITED NICKEL-BASED COMPOSITE COATINGS". National Conference on Advanced Forming Technology (AFT-2010), organized by department of Mechanical Engineering, R.V. College of Engineering, Bangalore & Tumkur University, Tumkur . Sponsored by Naval Research Board, New-Delhi. Held at April 15-16 , 2010
  80. A Paper titled "Effect Of Electro-Co-Deposition Bath Condition On Microhardness And Surface Morphology Of Ni-Wc Composite Coatings". National level student symposium in mechanical engineering, MECH FUSION-2010, organized by METAL mechanical engineers team for achieving laurels of DON BOSCO institute of technology, Bangalore, held 22nd April 2010 (Best paper award and cash prize for this paper)
  81. Sridhar R, H N Narasimha Murthy, M Krishna, Niranjan Pattar, Manjunath Bhagavathi , Vishnu Mahesh K R , "Comparative Study of Naval Grade Nanoclay Dispersed Vinylester/glass Composites for Mechanical Properties" [Oral Presentation] for the National Conference on "Advances in Forming Technologies" (AIFT-2010), R.V.College of Engineering, Bangalore. April 15 &16, 2010
  82. Niranjan Pattar, H N Narasimha Murthy, Sridhar R, Manjunath B , Vishnu Mahesh K R. "Influence of twin-screw extrusion parameters on the dispersion of Montmorillonite nanoclay in Vinylester matrix", [Oral Presentation] for the National Conference On "Advances in Forming Technologies" (AIFT-2010), R.V.College of Engineering, Bangalore. April 15 &16, 2010
Projects:
  1. “Redesign and fabrication of biomass gasification plant for coal/lignite fuel utilization”, 2009, Awarded by CMPDI, Principal Investigator- M.Krishna
  2. “Characterization of Aluminium based MMCs with higher percentage of SiC reinforcement for electronic packaging applications”, 2007, Awarded by AICTE, Principal Investigator- M.Krishna
Awards:
  1. ARCI BEST PAPER AWARD (Paper title: “Influence of Heat treatment on the properties of Al6061/Albite composites”) - VI National Symposium of Research Scholars on Metals and Materials (NSRS-4, 2002), The Indian Institute of Metals, Chennai Chapter and Department of Metallurgical Engineering, Indian Institute of Technology Madras, Chennai.
  2. BEST PRESENTATION AWARD (Paper title: “A study on damping behaviour of aluminium / short glass composites”) - VI National Symposium of Research Scholars on Metals and Materials (NSRS-4, 2002), The Indian Institute of Metals, Chennai Chapter and Department of Metallurgical Engineering, Indian Institute of Technology Madras, Chennai.
  3. Best Faculty Award- 2004 - Department of Mechanical Engineering, R V College of Engineering, Bangalore
  4. Award of Who’s Who - Listed in MARQUIS WHO’S WHO in Science and Technology, USA, 2004
  5. Living Science Award - Research, Awarded by the International Biographical Centre, Cambridge, United Kingdom, 2004
Previous Faculty Next   
...Top   

 

Copyright© rvce.edu.in All Rights Reserved. Designed By Techweb
Best View 1024 X 768